All our meters are designed & built in the U.S.A

The EPA recommends prudent avoidance of EMFs - Make sure your home is safe!

 

Contacta Loop-TSG

Designed for hearing aid loop calibration

Overview


LOOP-TSG Signal Generator

Audio signal generator that can be used with the Loop-FSM to calibrate audio frequency induction loop (AFIL) systems.  This device is designed and manufactured by Magnii Technologies for Contacta, Inc.

  • Simple 1-Button Operation
  • Balanced XLR Output Jack
  • Outputs Sine Waves at 11 different frequencies
  • Outputs Pink Noise in two different bandwidths
  • Calibrate loop systems to meet IEC/EN 60118-4 standards
  • Designed for use with the Loop-FSM


Contact Contacta, Inc. for purchase information.

Contacta Inc






Specifications

Specifications

LOOP-TSG Signal Generator

  • Sine Wave Frequencies:
    • 80 Hz
    • 100 Hz
    • 125 Hz
    • 250 Hz
    • 500 Hz
    • 1000 Hz
    • 2000 Hz
    • 4000 Hz
    • 5000 Hz
    • 6300 Hz
    • 8000 Hz
  • Pink Noise Bands:
    • 50 Hz to 5 KHz
    • 50 Hz to 15 KHz
  • Sine Wave Output Level: -10 dBV
  • Sine Wave Quality: <2% THD to 20 KHz
  • Pink Noise Quality: ±½ dB deviation from 1/f from 100 to 5000 Hz
  • Output: 600 Ohms Impedance Balanced XLR
  • Auto Power-Off after 30 minutes of inactivity
  • Designed to confirm loop systems meet IEC/EN 60118-4 standards
  • Runs on one 9V Alkaline battery (included), lasts ~40 hours
  • Unit Dimensions: 4.4" x 2.6" x 1.1"
  • 1 Year Warranty
  • Made in the USA